What Can The Thermal Imaging Camera Do?
The camera generally is a powerful tool for both central heating and plumbing engineers in detecting water leakage from hidden pipes located beneath floors.
It helps in finding the pipe routes with out the necessity to remove or dig up any form of flooring, like tiles and hardwood flooring.
The camera removes the need for guess work on pipe locations and will in lots of cases detect where any form of water leakage maybe.
What Type Of Camera Do I Need?
There are numerous totally different types of thermal imaging cameras round nowadays to select from, but in my experience the cheaper ones should be avoided for detecting water leakage.
The very best advise can be to look at the middle priced range of camera, it would give higher image high quality and image storage, as well locating water leakage underneath floors.
Central Heating Leak Detection
Overtime an established central heating system can and will develop some type of water leakage. This typically occurs when the boiler is replaced.
The old boiler labored with a small header tank situated within the loft so was not below numerous pressure.
The new boiler is now pressurised and the header tank not needed. The pipe work has only been tested on low pressure so when transformed to high pressure a leak could happen.
These types of leaks might not show up immediately, they can cause damp patches to appear on ceilings and walls, even pressure loss from the central heating system. These leaks if left, can cause damage and have to be positioned and repaired.
This is where the thermal imaging camera comes in, it will probably locate the water leakage and level you in the right direction to restore the leak.
Does Your Heating System Want A Powerflush?
The central heating system if not handled with an inhibitor will suffer from sludge build up within the boiler, radiators and pipe work.
Sludge is caused by all the different metals connected to the system, if you add water a conductor, FLIR a reaction is started and sludge starts to form.
When you’ve got sludge in your central heating system you’re throwing money down the drain. Sludge causes the boiler to work harder to provide the warmth you need.
Sludge puts pressure on all working components within the heating system and will time beyond regulation cause blockages within the system causing a system breakdown.
The thermal imaging camera can determine in case you are suffering from sludge build up within your system and point you in the right direction as to whether you want a powerflush or not.
Checking The Powerflush Has Cleaned The System
As soon as the powerflush has been carried out, the thermal imaging camera can be utilized to check that everything is clean. Images will be taken and stored then forwarded on to the shopper with a report on the situation of the central heating system.
Benefits Of Utilizing The Thermal Imaging Camera
The thermal imaging camera will find hidden issues quicker than normal process of lifting floors and searching for the problem.
Determine if the central heating system actually wants a powerflush.
Provide proof to the client with images that the powerflush has been accomplished correctly.
Locate underfloor heating pipe routes and detect any issues that may be present.
The thermal imaging camera has many advantages for the heating and plumbing engineers, to your customers, it makes you look more skilled, and will usher in more work once the word gets around.